How to Clean Rollerblades
Posted under: 
These day it’s modern, it’s funny and it’s good for your health and good body shape to have roller skates. However, as everything else, they need regular maintenance and cleaning, so they can be in good working condition. Here you are some steps that will make their wheels to roll smoothly, their boots to look great and your rollerblades to be safe enough for you!
As a first step, cleaners Clapham Park recommend you to start with removing all the small parts from the skates. One of the most important things is to keep everything on eye and to pay close attention to every detail, so you can’t lose any of their parts. Find a proper flat surface and put the roller skates there, then take a screw or a bolt and start removing the wheels one by one.
When you separate the roller particles, it’s time to continue with cleaning them. Take a cloth dampen in a soapy water with normal temperature and clean the boots first, and second the blade by rubbing them. Try not to get them too wet. Clean every small and hidden places on them such as crannies and nocks, because almost all the dirt is collected there.
When you finish with the blades, it’s time to clean the bearings. For the purpose it’s necessary to use a mild soapy dish for washing or a special cleaner for bearings if you want. After their cleaning, you can wash the wheels from the dirt and grease accumulated on them. You need a cloth and a paint thinner to rub them without using too much pressure and after that be sure they are dried completely until you remove them
At the very end, cleaners Clapham Park remind you to be extra careful when you replace the parts of the roller skates back to where they belong. Make sure they are tighten well and are secure enough for skating.
To avoid bad odors, you can use appropriate foot deodorizer to spray them from the inside. It’s now guaranteed that they are as fresh and clean as new ones.
